104
Sterling
Owner’s Guide
Pressing the
ORCH 2 OFF
button will turn it on. A second Orchestral sound selected (blinking) will be har-
monized along with any of the Tab sounds selected. (Normally the second Orchestral sound would be heard
in the melody but NOT in the Harmony).
Pressing the
FLUTES, STRING/VOCAL, & THEATRE ON
button will turn it off. Now, AOC will harmonize
with the Orchestral sounds selected but NOT Upper or Theatre tabs selected. Selected tabs will only play
the melody sound.
Pressing the
GENIUS OFF
button will turn it on. AOC will Harmonize the sound of the Upper Genius tab.
The
AOC
selections can be used to create different melody/harmony combinations. Changes can be saved
into a
BANK PRESET
. Pressing the
RESET
button or turning the Sterling off will return this to the factory
setting. Press the lighted
FEATURE(CLEAR)
button to return to the
POWER-UP
screen.
FEATURE PAGE 2
- The
DRAWBARS
feature allows you to customize the volume intensity of each flute sound
in each of three sections. All three sections work the same way.
1.
UPPER DRAWBARS
- SHORTCUT=F ANY UPPER FLUTE TAB
Controls the nine Flute tabs for the Upper Keyboard. (Flute Perc. is separately controlled).
2.
PED/LOWER DRAWBARS
- SHORTCUT=F ANY LOWER FLUTE OR BASS TAB
Controls the Bass 16 & 8 tabs and the five Flute tabs for the Lower Keyboard.
3.
FLUTE PERCUSSION
- SHORTCUT=F THE FLUTE PERC. TAB
Controls the Flute Perc. tab for the Upper Keyboard.
There are two ways to manipulate the volume of the Flute Drawbars on the screen.
To
increase
the volume of an individual Flute tab, press the screen just below the image of the particular
Flute Tab Drawbar you wish to change. The Flute Drawbar image will lengthen, increasing its volume.
Another method is to press the Flute Drawbar image, highlighting it and then repeatedly press the bottom
SCROLL
button, causing the Flute Drawbar image to lengthen, increasing its volume.
To
decrease
the volume of an individual Flute tab, press the screen just above the flute footage
number (1 3/5, 2, 4, 16) on the image of Flute Tab Drawbar you wish to change. The Flute Drawbar image
will shorten, decreasing its volume.
All
FLUTE DRAWBAR
settings are factory preset. Each Flute has a
volume range of 1 (minimum volume) to 10 (maximum volume).
Pressing the desired
DRAWBARS
choice on the screen will change
the display and show the current volume setting for each Flute tab in
that section. For example, pressing the
UPPER DRAWBARS
choice
will display the following:
Feature Page 2