background image

50

How to Obtain Service…

…in the USA:

We back your investment in quality products with quick, expert service

and genuine Lowrance replacement parts. If you're in the United

States and you have technical, return or repair questions, please con-

tact the Factory Customer Service Department. Before any product can

be returned, you must call customer service to determine if a return is

necessary. Many times, customer service can resolve your problem over

the phone without sending your product to the factory. To call us, use

the following toll-free number:

800-324-1354

8 a.m. to 5 p.m. Central Standard Time, M-F

Lowrance Electronics may find it necessary to change or end our ship-
ping policies, regulations, and special offers at any time. We reserve the
right to do so without notice.

…in Canada:

If you're in Canada and you have technical, return or repair questions,

please contact the Factory Customer Service Department. Before any

product can be returned, you must call customer service to determine if

a return is necessary. Many times, customer service can resolve your

problem over the phone without sending your product to the factory. To

call us, use the following toll-free number:

800-661-3983

905-629-1614 (not toll-free)

8 a.m. to 5 p.m. Eastern Standard Time, M-F

…outside Canada and the USA:

If you have technical, return or repair questions, contact the dealer in the country
where you purchased your unit. To locate a dealer near you, visit our web site,
www.lowrance.com and look for the Dealer Locator.

Содержание X86 DS

























































Отзывы: