background image

53

To turn off upper and lower limits:

Reactivate Auto Depth Range. From the Sonar Page, press 

MENU

|

 to

A

UTO 

D

EPTH 

R

ANGE

|

ENT

|

EXIT

.

FasTrack

This feature automatically converts all echoes to short horizontal lines
on the display's far right side. The graph on the rest of the screen con-
tinues to operate normally. FasTrack gives you a rapid update of condi-
tions directly under the boat. This makes it useful for ice fishing, or
when you're fishing at anchor. When the boat is not moving, fish sig-
nals are long, drawn out lines on a normal chart display. FasTrack con-
verts the graph to a vertical bar graph that, with practice, makes a use-
ful addition to fishing at a stationary location.

Sonar Page showing FasTrack.

Fish I.D.

 (Fish Symbols & Depths)

The Fish I.D. feature identifies targets that meet certain conditions as
fish. The microcomputer analyzes all echoes and eliminates surface
clutter, thermoclines, and other signals that are undesirable. In most
instances, remaining targets are fish. The Fish I.D. feature displays
fish symbols on the screen in place of the actual fish echoes.

There are several fish symbol sizes. These are used to designate the
relative size between targets. In other words, Fish I.D. displays a small
fish symbol when it thinks a target is a small fish, a medium fish sym-
bol on a larger target and so on.

The sonar's microcomputer is sophisticated, but it can be fooled. It can't
distinguish between fish and other suspended objects such as trotlines,
turtles, submerged floats, air bubbles, etc. Individual tree limbs ex-
tending outwards from a group of limbs is the hardest object for the
Fish I.D. feature to distinguish from fish.

Structure

Bottom signal

Fish arches

In FasTrack, fish
arches show as
horizontal bars.

FasTrack

bar graph

ColorLine

Surface clutter

Содержание X100C

























































































Отзывы:

Похожие инструкции для X100C