7
2. Try reducing the iWAY's output level.
This step will resolve the
issue if you're overloading the input to your stereo or your FM modula-
tor. To reduce the iWAY's output level, pressing and hold the
SPEAK
key until the Sounds menu appears.
Notice that there are independent Voice Volume and Music Volume
controls. Try reducing the
M
USIC
V
OLUME
until the distortion is elimi-
nated. This method will not always work, because sometimes the song
itself is recorded too high a volume level. In this case, you'll have to re-
duce the volume earlier in the audio chain.
3. Adjust the iWAY's Audio Equalizer.
Lowering the equalizer's
Preamp control will lower the volume level being sent through your
audio output, reducing distortion. To do this, from the Music Mode
press the
MENU
button to bring up the Music Menu. Choose the
S
ETUP
EQ
command and an Equalizer screen will appear. Press and drag the
slider on the Preamp control down two or three steps. To exit the
Equalizer screen, press the "X" button in the upper right corner of the
screen until you return to the Music Mode display.
Lowering the Preamp gain will likely resolve your distortion issues.
You may now wish to re-adjust the Music Volume and the Voice Vol-
ume to return the voice instructions and music playback to the levels
you want. Repeat the instructions in step 2 to adjust these settings.
USB-to-PC Cable Connection
The iWAY comes with a special cable designed to allow you to copy files
from your computer to iWAY's internal hard drive.
NOTE:
To safely
connect
the GPS unit to a computer, you
must
refer to the
enclosed yellow instruction sheet on “Making USB Connections Be-
tween iWAY 500C and Computers.” (If you lose the instruction
sheet, download a free replacement from www.lowrance.com or con-
sult the customer service department; contact information is on the
inside back cover of this manual.)
To
disconnect
, follow the appropriate instructions for your computer’s
operating system:
Disconnect with Windows XP
1. Wait until any file operation (such as transferring files) is finished.
Copying files to the iWAY is complete when the copy dialog box goes away.
2. Disconnect the cable from the computer and the iWAY. The computer
and GPS unit are ready for other tasks.
Disconnect with Windows 2000
Wait until any file operation (such as transferring files) is finished. Con-
firm that your file operation is complete by using the Eject command:
Содержание Lowrance iWAY 500C
