8
Dual Display Page (left) and Clock Page (right).
To modify what pages will be displayed, press
MENU
and use the up and
down keys until
P
AGES
appears in the center square. Press
MENU
and use
the up and down keys to move through the page options. Press
MENU
to
check or uncheck the boxes next to the page category you want shown on
the main display. After making your selection, the menu will time out
and take you back to the main screen. Use the up and down keys to cycle
through the four page displays, which are broken down in more detail
below.
Temperature Page
The temperature sensor is mounted on the transom to monitor water
temperature.
Voltmeter Page
The voltmeter displays the voltage.
Dual Display Page
The dual display page shows the temperature and the
voltage, simultaneously.
Clock Page
The clock displays local time and is the only page category not included in
the gauge display rotation by default.
Setting the clock
Press
MENU,
then use the up and down keys until
S
ET
T
IME
appears in the
center square display, then press
MENU
again. Use the up and down keys
to set the hours and minutes. When you are satisfied with one setting,
press
MENU
to modify the other, then let the menu time out.
AutoScroll
If you would like your page displays to rotate automatically, then you
need to check out AutoScroll, the first category on the main menu.
Autoscroll allows you to not only turn on an automatic page rotation, but
gives you control over how long the duration will be before the gauge
switches to the next page. To access the AutoScroll menu, press
MENU
|
MENU
and use the up and down keys to select the desired dura-
tion. The settings are Off, 3, 5 and 10 seconds. The default setting for