Lowrance iFINDER Expedition C, Руководство по эксплуатации

Страница: 43 / 144

35
The 15-mile zoom figure (left) shows the course line connecting your
current position to your destination. The 60-mile zoom (center) shows
both current position and destination on screen. The Navigation Page
(right) will also show navigation information.
To stop navigating to the cursor, use the Cancel Navigation command:
press
MENU
|
↓
to
C
ANCEL
N
AVIGATION
|
ENT
|
←
to
Y
ES
|
ENT
. The iFINDER
stops showing navigation information.
Navigate to a Point of Interest
For POIs in view on the map, you can use the Navigate to Cursor com-
mand above. Use the cursor to select the POI.
Another method involves searching for POIs by pressing the
FIND
key
and selecting
M
AP
P
LACES
. (For instructions on POI searches, see the
searching example earlier in this section or turn to Sec. 6 , Searching .)
After you have selected
M
AP
P
LACES
and pressed
ENT
, a list of map cate-
gories will appear. Use
↓ ↑
to highlight a category and press
ENTER
.
The
F
IND
B
Y MENU
will appear with two options:
N
AME
and
N
EAREST
. Select
N
EAREST
and press
ENT
. A list of locations will appear with the one near-
est you highlighted at the top. Press
ENT
, which will launch the way-
point information screen. The
G
O
T
O
command will be highlighted at the
bottom of the screen, so press
ENT
. The iFINDER begins showing navi-
gation information to the item.
To cancel navigation, press
MENU
|
↓
to
C
ANCEL
N
AVIGATION
|
ENT
|
←
to
Y
ES
|
ENT
. The iFINDER stops showing navigation information.
Creating and Saving a Trail
A trail or plot trail, is a history of the path you have taken. On the
screen, trails are represented by a solid line extending from the back of
the current position arrow.
With the default auto setting, the iFINDER creates a trail by placing a
dot (trail point) on the screen every time you change directions. (The
method used for creating a trail and the trail update rate can be ad-
justed in Advanced Mode. See Sec. 5 for
Trail Options .)