Lowrance GlobalMap 5300C iGPS Скачать руководство пользователя страница 96

Страница: 96 / 172

Nautical Chart Notes

NauticPath charts contain notes or chart information, represented by

circle-i Chart Note icons on the map display. An example is shown in

the following figure.

NauticPath chart showing Chart Note icon selected by cursor (left).

Note information screen (right).

To view Chart Note information:

1. Use the arrow keys to move the cursor over a Chart Note icon. When

it's selected, a pop-up name box appears.
2. Press

WPT

to display the Note Information screen.

3. To scroll through the Chart Note screen, use

↑

↓

arrow keys to read

the information. To return to the main page display, press

EXIT

repeat-

edly.

Entrance to Aransas Pass on a NauticPath chart with 8-nautical mile

zoom (left). Remaining images (left to right): same position at 4-

nautical mile, 1-nautical mile and 0.3- nautical mile zoom ranges.

Port Information

NauticPath charts contain Port Services information, represented by

anchor icons on the map display.

www.Busse-Yachtshop.de email: [email protected]

Содержание GlobalMap 5300C iGPS













































































































































































Результаты поиска

Содержание GlobalMap 5300C iGPS

Отзывы:

Lowrance GlobalMap 5300C iGPS, Руководство по эксплуатации, Страница: 96 / 172

Результаты поиска

Содержание GlobalMap 5300C iGPS

Отзывы: