Lowrance EP-DDS, Руководство по установке

Страница: 8 / 12

8
Add ratchets to bracket and transducer.
3. Assembling the transducer.
Once you determine the correct position for the ratchets, assemble the
transducer. Don't tighten the lock nut at this time.
Assemble transducer and bracket.
4. Drilling mounting holes.
Hold the transducer and bracket assembly against the transom. The
transducer should be roughly parallel to the ground. The
transducer's centerline should be in line with the bottom of the hull.
Mark the center of each slot for the mounting screw pilot holes. You
will drill one hole in the center of each slot. Drill the holes, using the
#20 bit (for the #12 screws).
Assemble transducer and bracket.
Nut
Metal
washer
Metal washer
Bolt
Rubber
washers
Transducer
bracket
Ratchet
Ratchet
Transducer
Flat washer
Lock washer
Flat washer
Nut
Bolt