background image

Warning

The user is cautioned that any changes or modifications not expressly approved by the party responsible 

for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant 

to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that the interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can 

be determined by turning the equipment off and on, the user is encouraged to try to correct the interfer-

ence by one or more of the following measures: 

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on a circuit different from that of the receiver

Consult the dealer or an experienced technician for help

NOTE:

 

This manual covers Elite-4x, Elite-5x, Elite-7x and Elite-9x units. As a result, screenshots of 

menus and dialogs may not match the look of your unit.

Содержание ELITE-4X HDI






































Отзывы: