7
5. Install motor housing.
Temporarily lift the motor housing to the
upper mounting bracket to determine which
two motor housing screws in the sides of
the mounting bracket align with the slotted
holes in the top edge of the motor housing.
Partially loosen the two motor housing
screws that align with the slotted holes.
Remove the other two motor housing
screws from opposite sides of the mounting
bracket.
6. Secure motor housing.
Slide the motor housing over the motor,
aligning the slotted holes in the motor
housing with the loosened motor housing
screws in the mounting bracket. Twist the
motor housing to lock into place. Then re-
insert the two previously removed motor
housing screws and securely tighten all four
screws.
7. Attach blades to blade arms.
Partially insert three blade screws along with
the three blade washers through one blade
and into the blade arm. Tighten each screw
with a Phillips screwdriver (not included),
starting with the one in the middle. Repeat
this step for remaining blades and blade
arms.
ASSEMBLY INSTRUCTIONS
Motor
Housing
Screw
Motor
Housing
Screw
Blade Screw
Blade Washer
Blade Arm
