Lowenstein Medical prisma VENT30, Сборка и основные инструкции по использованию и обслуживанию, Страница: 19 / 64

LM
T 6
84
31
0
9/2
02
1
EN
|
19
4 Preparation and operation
1. Push the free end of single circuit with valve 1 onto the device outlet port.
2. Connect valve control tube 2 to connection .
3. Connect pressure measuring tube 3 to connection .
4. Connect patient/ventilator interface (e.g. mask) to patient valve 4 .
The device can also be operated with valve ventilation without pressure being
measured at the patient. In this case, the connection for the pressure measuring tube
is unused (perform tube test).
3
1
2
4
P