4
1.
Hold the C-stand so the center shaft is resting
over your right shoulder, and the feet are
pointing down.
2.
Hold the top leg with your left hand, and rotate
the bottom leg with your right hand 1/3 turn
counterclockwise until it locks into place.
Setting Up the Legs
Removing/Replacing the 40 in. Riser
3.
While still holding the top leg in place with
your left hand, turn the middle leg 1/3 turn
counterclockwise until it locks into place. The
bottom leg will rotate with it and lock into place.
4.
The legs should be spread evenly and locked into
place. Place the C-stand down on a flat surface
and proceed to mount your lights or accessories.
1.
Remove all fixtures and accessories, and
remove the grip arm and grip head.
2.
Loosen the base locking knob, and lift the 40 in.
riser out of the junior receiver.
3.
Replace it with a 20 in. riser, a junior to baby-pin
adapter, or any other 1
⅛
in. junior diameter
adapter.
4.
Tighten the locking knob until secure.
Turtle Base C-Stand
Lowel C-stand/GripHead/GripArm Manual.indd 4
11/18/19 11:09 AM