en
– Original instructions
38
6.6 Technical references
6.6.1 Example: ACT control mode with analog 0-10V input
Graph
Figure 17: ACT control mode diagram
Table 12: Description
Grey area
Missing input Voltage detection threshold
Speed [rpm]
Actual speed relative to the 0-10V analogue input voltage value (see Par. 4.3.3, table 8 contacts
7 and 8)
Max
P26 (Max RPM set)
Min
P27 (Min RPM set)
Setpoint
Example of Actual Speed related to a specific Vset Voltage value
Sby
Input Voltage at which the motor goes in Stand By
Vin [V]
Input Voltage value to control the pump in ACT mode
Different thresholds are managed by the pump, from Non-detection to Max speed)
For further information on the control mode and the ACT regulation parameters, see Par. 6.5.3.
Vin [V]
Speed
[rpm]
Содержание e-HME
Страница 4: ...en Original instructions 4...
