Label Applicator Operations Manual Rev B
26
Label Applicator
Appendix B: Application Methods
SYSTEM MENU
- Enter SYSTEM Menu from the Setup Screen.
Sets the rewind motor direction.
An optional line encoder can be used to follow the speed of the conveyor. Using a line
encoder changes some of the settings.
Wipe
is used for this application.
Typically leading edge product triggers will offset the label placement from the front. If the
product lengths vary, and the label needs to be placed off of the trailing edge of the product,
set this value to No.
JOB MENU
- Enter JOB Menu from the Setup Screen.
LINE ENCODER DISABLED
LINE ENCODER ENABLED
Determines the amount of time to delay from the product detec-
tor trigger to label feeding. The setting depends on feed speed
and label placement on the product, but is usually kept at a
minimum value.
Sets the distance from the leading edge of
the label to the leading edge of the product.
