9
•
Front arm stopper adjustment:
The front arm stop adjustment is factory set to insure that the front arm
roller stays in contact with major flaps of the box. This allows for a tight
tape seal across the horizontal length of the box. The adjustor does not
need to be adjusted for normal applications. In some cases it may be
necessary to adjust the stop depending on the type of machine that the
cartridge is being used in. If the cartridge is placed in a machine and the
tape is not being applied to the major flaps with enough pressure an
adjustment will be necessary. This will be evident by inspecting the box
as it exits the machine. Normal symptoms include the tape bridging
across the major flaps, or the tape bunching up on the major flaps after
the tape was cut. Refer to figure 9.
Figure 8
Figure 9
Adjustor nut
Front arm stop
