background image

Roller Duo Roll

 

Fitting and Operating Instructions

Easybreak

® 

Connector

200mm apart

CHILD SAFETY

Your blind will be supplied with either Easybreak

® 

connectors attached to the 

operating chain or a cord tidy that will need to be fitted to the wall.

Easybreak

® 

System

Two Easybreak

®

 connectors are connected to the operating chain 200mm apart. 

This ensures that at least one of them will be in the vertical position ensuring they 
perform as required.  

If excessive weight is applied within the loop an Easybreak

®

 connector will break 

apart.

If an Easybreak

® 

connector comes apart then it will need to be re-connected.  

To re-connect, check the Easybreak

® 

connector for damage. If undamaged,  

re-connect the chain by inserting the last ball on the end of the chain into the larger 
hole of the connector and push it into place.

Tensioned System using cord tidy.

If the blind is fitted with a continuous loop chain then a cord tidy will be attached 
to the chain. This must be fitted to the wall as follows:

Fitting a side fix cord tidy.

The cord tidy is a two piece device and will arrive with a disposable red tab fitted 
to it.

Содержание Roller Duo Roll













Отзывы: