If Model TLI is to be installed with Model VPSC Housing for mount to ceiling or wall, refer to
instructions on page 4.
If Model TLI is to be flush mounted to ceiling using ERD-8 back box and BR-8WS (or BR-8VP
vandal resistant grill), refer to drawing on page 5.
If Model TLI is to be surface mounted to ceiling using MR-8 Surface Mounting Ring and BR-8WS
(or BR-8VP vandal resistant grill), refer to drawing on page 6.
CONNECTING MODEL TLI TO LOUROE AUDIO BASE STATION
The audio inputs differ among the various Louroe base stations. Refer to the installation instructions
for the specific model base station.
NOTE: IF USING CABLE FROM OTHER MANUFACTURERS, COLOR CODE MAY VARY
SENSITIVITY SWITCH OF TLI
For special installations that require less microphone sensitivity, a sensitivity switch is located at the
top right corner of the PC board and has two positions, N (normal) and L (low). Factory set at “N”.
Use small screwdriver to move slide switch to L position (low sensitivity).
Model TLI w/VPSC
Model TLI-CF
Model TLI-CS
INSTALLATION AND OPERATING INSTRUCTIONS
Page 3 of 8
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
TLI_inst_4/11