PAGE 14 of 28
CONNECTION TO A DVR, VCR OR OTHER RECORDING DEVICE:
Remove the jumper (FIG.9A) that connects the
Audio Input Jack[38]
to the
Audio
Output Jack [39]
located at the rear of the DG-MA. Using a dual RCA cable, connect the
Audio Input Jack[38]
of the DG-MA to the Audio Output Jack of the recorder. Connect
the
Audio Output Jack[39]
of the DG-MA to the Audio Input Jack of the recorder. See
Fig. 9 below.
Fig. 9 Connecting to a Receiving Device
Fig. 9A Jumper Connection
INPUT
OUTPUT
AUDIO
IN
OUT
RECEIVING DEVICE
RCA CABLES
REAR OF DG-MA
INPUT
OUTPUT
AUDIO
JUMPER
REAR OF DG-MA
AUDIO
NOTE:
If DG-MA is not connected
to a recording device,
jumper must be plugged
into the audio input and
output. Otherwise DG-MA
will not receive audio from
the remote microphone.
LOUROE ELECTRONICS 6955 VALJEAN AVENUE, VAN NUYS, CA 91406 TEL (818) 994-6498 FAX
994-6458
Website: www.louroe.com Email: [email protected]
(818)
INSTALLATION AND OPERATING INSTRUCTIONS
DG-12II 2/08
Содержание DG-12II
Страница 2: ......
