Page 3 of 7
DESCRIPTION OF PARTS
[1]
Press to Activate Zone Switch
Pressing switch activates the system for listen and talkback. Zone indicator
LED
[9]
illuminates. Press switch again to de-activate the system. Zone
indicator LED will turn off.
[2]
DVR/VCR Playback Switch
Press switch for audio playback from a recorder. The Playback LED
[10]
is
illuminated. During this time, live communication (listen mode) is turned off.
Pressing switch again cancels playback mode and LED
[10]
turns off.
[3]
Talkback Switch
Press to activate talkback feature and to talk to remote
speaker/microphone. Audio from remote microphone is muted when switch
is pressed. Hold down switch until talkback operation is completed.
[4]
Monitor Volume DOWN Control Switch
Press to decrease the level of audio from the Monitor Speaker
[13]
.
Continue to press and release until desired level of volume is attained.
Pressing and holding down will not change volume.
[5]
Monitor Volume UP Control Switch
Press to increase the level of audio from the Monitor Speaker
[13]
Continue
to press and release until desired level of volume is attained. Pressing and
holding down will not change volume.
[6]
Talkback Volume DOWN Control Switch
Press to decrease the loudness of audio at the remote
speaker/microphone. Continue pressing switch until desired level of audio
is attained. Pressing and holding down will not change volume.
[7]
Talkback Volume UP Control Switch
Press to increase the loudness of audio at the remote speaker/microphone.
Continue pressing switch until desired level of volume is attained. Pressing
and holding down will not change volume.
[8]
HeadphoneJack
Used for private listening. Any 3.5mm stereo headphone with 8
Ω
to
6
0
0
Ω
impedance may be used. Mutes AP-1TB speaker output when in use.
[9]
Zone Indicator LED
Illuminates when a zone is activated. Audio from microphone is present at
the Monitor Speaker
[13]
.
[10]
Playback Indicator LED
Illuminates when in playback mode. Remains lighted until the Playback
Switch
[2]
is pressed again.
[11]
Talkback MIC
Built-in microphone for talkback.
[12]
Power Indicator LED
Indicates power is present at the unit.
[13]
Monitor Speaker
Speaker output. Muted when a headphone is connected to the Headphone
Jack
[8]
.
[14]
MIC 6-Pin Terminal Block
Connects to speaker/microphone at remote location.
[15]
Audio-In Jack
Receives audio from an external source (recorded playback from a DVR or
VCR).
[16]
Audio-OUT Jack
Passes audio to an external receiver (DVR, VCR, etc.)
[17]
Power Switch
Provides power to the unit.
[18]
DC-IN Jack
Accepts 24 Vdc from external power supply (AC Adapter included).
LOUROE ELECTRONICS
AVENUE, VAN NUYS, CA 9140
TEL (818) 994-6498
FAX
994-6458
Website: www.louroe.com Email: [email protected]
6955 VALJEAN
6
(818)
AP 1TB 6/08