Louisiana Grills LG1100, Руководство пользователя, Страница: 13 / 40

1
3
Assembly Instructions
INSTALLING THE “ARCHED FLAME BROILER”:

To ensure proper height, the bottom of the mounting bracket (A)
should not be within the pellet drop chute area.
If you do need to adjust the bracket, loosen off the 2 (two)
Phillips screws, lift the bracket and re-tighten the screws.

Take the Arched Flame Broiler ( C) and hold it so that the end with
the cut out and slots is in your left hand. The plate then clips
easily over the adjustable mounting bracket. (B)

Take the Arched Flame Broiler Cover Plate (D) and place it on
top of the main piece ( C). This plate is used to slide
over the flame broiler opening, to open or close “Diirect”
flame searing.
INSTALLING THE HANDLE:
Tools Required:
9
/
16
” Wrench

Insert one
scew
through the hole provided in the barrel

Install the
LARGE Decorative W
asher
, then the
smaller washer
on the
screw
end sticking through
the
barrel.

Hand thread and tighten this
screw
to one of the ends
of the one piece stainless steel handle. .

Follow the same procedure to secure the other end of the handle to the barrel.

Using a
screw driver
firmly tighten both bolts until handle feels firm.
CAUTION!
DO NOT OVERTIGHTEN! Only a snug fit is required.
INSTALLING THE THERMOMETER:
The thermometer comes complete with its own threaded nut
already installed on the thermometer.

Simply spin off the threaded nut
and small washer.
Insert the Dome
thermometer
, along with the large finiishing washer as
well as the protective felt,
through the hole provided in the top of the
hood,
•
T
hen firmly hand tighten the nut back onto the thermometer.
Handle
Phillips Screw
Driver
Cordless Drill
& Phillips Bit
A
D
Large Decorative
Washer
Small Washer
#2 50 5 / 8 "
Machine Screw
Dome Thermometer
Large Protective Felt
Large Finishing Washer
Washer & 9/16” Nut
•