Lotus EMIRA 2022, Руководство пользователя

Страница: 117 / 252

117
Trip A Reset
Pressing the reset button on the end
of the light switch will reset all infor-
mation stored in the Trip A trip meter
(trip distance, average fuel consump-
tion and average speed). A notification
message will briefly appear in the driv-
er’s display showing that trip meter 1
has been reset.
Also see page 74 for further informa-
tion on trip meter options and resetting
using the right-hand steering wheel
keypad.
Hazard Warning Lights
To Activate: Press the in the centre
console. The switch, direction indicator
lamps and
User manual - China CX11 Non-electric, S002517, 9.00, en-US, Approved, 2017-12-07 12:06.
Driver environment
69
risk. Make sure the fault is corrected before driving. If you are not
clear about the fault, consult a Lynk & Co Center for inspection.
Warning symbol in red : The warning indicator alerts
you that an important function is activated or that a
serious fault has occurred that may affect the vehicle's
drivability. The warning symbol can also illuminate in
conjunction with other indicators.
Low engine oil pressure : This indicator warns of low
engine oil pressure. If the indicator illuminates during
normal driving, find a safe place and stop the vehicle
immediately, contact a Lynk & Co Center for inspection.
SRS airbag fault : If this warning indicator illuminates
during driving, it means a fault has been detected in
the front airbags, side airbags or inflatable curtain
and/or pre-tensioner systems. If this happens, contact a
Lynk & Co Center for inspection.
Front passenger airbag on : The front
passenger airbag is activated and adults
can sit safely in the front passenger seat.
Never sit a child on a booster cushion, in a
child seat or in a rear-facing child seat on the front passenger seat
if the airbag is activated.
Front passenger airbag off : The front passenger
airbag is deactivated and children shorter than 140 cm
in a child seat can sit in the front passenger seat. It is
safer when the child is properly secured in the rear
seats.
Seat belt reminder : The indicator illuminates if the seat
belt is unfastened in the driver or front passenger seat.
Battery charging fault : If this warning indicator
illuminates while the engine is running, it may indicate
the charging system is not functioning properly. Please
switch off all the unnecessary electrical equipments,
contact a Lynk & Co Center for inspection.
Brake fault : The warning indicator illuminates if there is
a fault in the brake system (e.g. low brake fluid).
Contact a Lynk & Co Center for inspection.
Anti-lock braking system fault : If the warning indicator
illuminates when the engine is running or during
driving, there may be a fault in the Anti-lock braking
system. Contact a Lynk & Co Center for inspection.
Brake light fault : The indicator illuminates when there is
a fault in the brake lights system. Contact a Lynk & Co
Center for inspection.
Direction indicator fault : The indicator illuminates when
there is a fault in the direction indicators system.
Contact a Lynk & Co Center for inspection.
Coolant temperature : This indicator illuminates when
the engine is overheating. If this happens, turn off the
air conditioning and let the engine idle for a while. If the
indicator remains illuminated, stop the vehicle safely
and contact a Lynk & Co Center.
Steering assist fault : The indicator illuminates when
there is a fault in the power steering assist system.
Contact a Lynk & Co Center for inspection.
symbols in the driver’s
display will flash.
To Deactivate: Press a second time to
switch off.
WARNING: If stopped for an
emergency, move the vehicle off
the road, switch on the hazard
warning lights and mark the
vehicle with other warning devices
as available to reduce the risk of a
collision.
N
NOTE: Use of the hazard warning
lamps may be subject to local
traffic laws.
LIGHTING