©Copyright LOTRONIC 2017
PARTY-MOOVY12 / PARTY-MOOVY15
5
USB/SD Operation
Keep the speaker away from high temperatures, strong magnetic fields and any equipment that could
generate interference. If the speaker stops working, switch it off and on again, or unplug USB/SD/MMC
card and re-plug it. The speaker should be back to normal status.
The maximum size of USB/SD device that can be connected is 32 GB.
Supported music formats: MP3, WMA
BLUETOOTH OPERATION
1. Turn on the unit and press the input selector button on unit to select the Bluetooth function.
2. Activate the Bluetooth feature on the external device to be paired.
3. Initiate a search for devices. The device shows up as "BT SPEAKER".
4. Press the
to start playing and the buttons
and
for the selection of songs.
CHARGING THE UNIT
This speaker has a high capacity battery. Please use the supplied lead for charging.
The power adapter has an indicator light that will illuminate red when the speaker is on charge. It takes
around 6-8 hours to fully charge the speakers. Disconnect the power adaptor as soon as the battery is fully
charged.
Note: When the battery of the speaker is low, please charge it within 48 hours.
Specifications
PARTY-MOOVY12
PARTY-MOOVY15
Subwoofer
12"/30cm-100Hz
15”/38cm
Output power
600W
700W
Frequency range
100Hz - 20kHz
S/N ratio
>80dB
Sensitivity
96db (+/-2db)
98dB (+/-2dB)
Power supply
9V 1.2A via supplied 100-240Vac 50/60Hz mains adaptor
Battery
Lithium-ion battery 2200mAh DC 7.4V
Dimensions:
300 x 295 x 500mm
430 x 385 x 640mm
Weight:
5.9kg
9.8kg
Trouble shooting
If a problem occurs, follow the steps in the table below. If problem still can’t be solved, please contact your
retailer.
Problem
Possible cause
Solution
No sound when
power on
1. No input source
2. Volume down
1. Connect an AUX signal
2. Adjust volume
No sound from the
microphone
1. Bad mic connection
2. Mic not switched on
3. Mic volume down
1. Plug in the mic properly
2. Switch mic on
3. Increase mic volume
No sound after
inserting USB/SD
card
1. Incorrect file format
2. Bad connection of USB/SD card
1. File format should be MP3
2. Plug in USB/SD card properly
If Speaker makes
loud noises
1. Microphone switched on but
may be too close to the speaker
2. Microphone switched on but is not
being used.
1. Keep the microphone 2
meters away from the speaker
2. Turn off microphone if not in use.
3. Adjust microphone
