How to Assemble AR04 Argon Regulator to your Gas Cylinder & Welder:
1)
Connect the argon hose to the outlet fitting and tighten connection firmly with a wrench.
2)
If the hose is not entirely fitted make sure to add extra clamps on the fitting end so the gas
can still flow through the hose.
3)
Connect the other end of the hose to the welding machine.
4)
Check for gas leaks. Once your machine, fittings and installation is secured you can begin to
operate your welding machine.
For technical support contact Lotos Technology by email at
by phone at 408-739-2329. Website:
