6
/
18
6
/
18
3)
If your SIM card is turned on and you are required to enter the SIM PIN,
please refer to your mobile phone user manual to turn off the SIM PIN
input function.
For WIFI network, it will be turned off when ACC off. Please make sure
there is a stable and high-speed-transmission WIFI router in vehicle. First
time WIFI connection need to be set up by Micro Android data cable with
PC by Android screening software. (Further details, please get help from
your supplier.)
5.3 Wiring
When wiring device to vehicle, the device must be power off status.
Cables
Wires
Description
Power Harness
12V+
12V/24V Power Positive
GND
Negative (Ground)
ACC
Corresponding to ACC line
L_TURN
Positive wire of left turn signal
R-TURN
Positive wire of right turn signal
RX and TX
To be defined
External Camera
4pin BMW
Connect to DMS camera
After wiring, wrap the exposed wire connector with black tape (electrical
tape).
5.4 Power on Verification
After completing the wiring, do a reconfirmation wires all connected
rightly. Then turn device power on, if the LED turns from red to green,
device is working normally.
5.4 Operation of indicator light
By checking the status indicator, you can understand the working status of
the device. The status of the indicator is described as follows:
LED
LED Status
Meaning
