15
3.9.
To Fit a Cable-Tie Collar
IMPORTANT: The following information is intended for single-use transmitters.
For re-useable transmitters such as LiteTrack 20, please follow the Quick Start
Guide provided with the collar.
1.
Place the collar around the animal’s neck
Ensure the collar is oriented correctly. For more information, see the
diagram (previous page).
2.
Thread the cable tie through the clasp
Do not over-tighten. Cable ties only slide in one direction.
3.
(If relevant) Cut off any excess strap
If the strap is too long for the animal, it may become a hindrance. As a
guide, the length of the strap in the photo (right) is sufficient. Do not
cut the antenna. Cutting the antenna will reduce its performance.
The animal is ready to release.