6
OPERATION
CONNECTING MONITOR TO A VCR
Connections
Connect the supplied audio/video cable from the back of the monitor to the Audio/Video Input of the
VCR
.
Note: If you are connecting this unit to a standard VCR you must set your VCR to a video channel,
such as an A/V, Line 1/Line 2, AUX, etc or a snowy picture will result during playback
Did You Know?
You have the option of connecting this system to a Time Lapse VCR. A time lapse VCR provides you
multiple recording options allowing you to record up to 40 days using a standard T-120 tape. Refer to
the optional accessories page for more details.
TROUBLE SHOOTING
If the system does not function properly, check the following points:
FOR MORE INFORMATION
http://www.lorexcctv.com
PROBLEM
REMEDY
MONITOR
Too dark or bright
Re-adjust the CONTRAST or
BRIGHTNESS controls
NO POWER
Check for AC connection
Poor picture quality
Clean the camera lens. Re-adjust the
CONTRAST or BRIGHTNESS controls
Picture but no Sound
Adjust the VOLUME
Shrinking picture
Check the condition of the POWER
source
CAMERA
No Picture
Check the cable for any lose connection
Picture flickering or Over
Exposed
Make sure the camera is not facing any
direct light or sunlight
Monitor
RCA Cables
(not included)
Monitor
Back Panel
AUDIO VIDEO
As our products are subject to continuous improvement, LOREX and its subsidiaries reserve the right to modify product
design, specifications and prices, without notice and without incurring any obligation. E&OE