www.lorexcctv.com
LW2100 SERIES Series Quick Start Guide_R1
Page 1
COLOR DIGITAL WIRELESS SURVEILLANCE SYSTEM
WITH INDOOR/OUTDOOR NIGHT VISION CAMERA
LW2100 SERIES - QUICk START GUIDE
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Time
Tools
Skills - Easy
Under 15 Min
utes*
Hand Tools
Plug & Play connections,
On screen set up
* Installation time may vary based on
application and camera location
Connect power adapter to local 120V AC power outlet
B.
Connect the Camera
A.
Connect the Receiver
2
Connect one end of the
RCA Audio Video Cable
to the Receiver.
Connect the included
Wireless Antenna to
the receiver
1
3
View your Camera images on any Observation
Monitor with standard BNC inputs or TV with
RCA inputs**.
Connect the Video end of the RCA Cable to the
Female end of the included RCA/BNC Adaptor.
Connect the BNC Adaptor to your Observation
System or DVR with standard BNC inputs.
Connect the Audio end of the RCA cable to the
Audio input on your Observation System or DVR.
To view camera images on your TV, connect the
RCA Video and Audio ends of the RCA Audio/
Video cable to the Video and Audio inputs on
your TV.
1
2
Getting Started
** Requires viewing/recording device with RCA Video or BNC Video
input. Viewing/Recording device sold separately.
The Digital Wireless Surveillance System
comes with the following components:
• Digital Wireless Color Camera*
• Camera* Stands
• Slim Wireless Receiver
• Wireless Antenna’s for camera*
and receiver
• Power Adaptors* for camera* and
receiver
• Battery Adaptor Case for camera*
•
RCA/BNC Adaptor
• RCA Audio/Video Cable*
• Instruction Manual
*Number of cameras may vary by model. Check your package for specific
content information.
*
Mount camera stand to
the wall
NOTE:
Wireless cameras require a power source
(either an electrical outlet or battery power) to
operate. If you plan to permanently mount the
camera in a location, it is recommended to use
the included Camera Power adaptor to prevent
interruptions in the image, as the battery adaptor is
intended for a temporary power solution.
1
NOTE:
Before you install a camera, carefully plan
where and how it will be positioned, and where you
will route the cable that connects the camera to the
power adaptor or battery adaptor. Before starting
permanent installation, verify its performance by
observing the image on a monitor when the camera
is positioned where it will be permanently installed.
4
Connect one end of the Camera Power
Adaptor to the camera and the other
end to an electrical outlet.
Connect the Wireless Antenna
to the camera.
2
3
Secure Camera to the
Stand.
NOTE:
When adding cameras that were not included
in the original box, you will need to pair up the
camera with the receiver. Please refer to the Camera
Pairing Section of the User Manual.
LW2100 Series_QSG_EN_R1.indd 1
5/6/2008 5:04:56 PM
