©2008 Lorex Technology Inc.
As our product is subject to continuous improvement, Lorex Technology & subsidiaries reserve the right to
modify product design, specifications & prices without notice and without incurring any obligation. E&OE
Step 2
- Wireless Camera Installation
The Camera can be powered either by using
the provided Power Adaptor, or using a 9V
battery (not included) in combination with the
Battery Adaptor Cable.
Connecting Camera to Power
Adaptor
Connect the Power Adaptor to the Female
Barrel Power termination on the camera.
Connecting Camera to the
Battery Adaptor Cable
(optional)
Connect the Camera Battery Adaptor
cable to the Female Barrel Power
termination on the camera. Connect a
battery to the cable.
NOTE:
A new 9V battery should last
for approximately 4 hours without the
IR LEDs in use.
LW1001 Series
Quick Start Guide_EN_R1 - Page 1
www.lorexcctv.com
Color Wireless Surveillance System
with Indoor/Outdoor Night Vision Camera(s)
Step 3
- Viewing your System
Turn on TV or Observation
Monitor, and switch the video
channel that the receiver has
been connected to.
Tip:
If your TV has a PIP
feature, you can have the
camera images displayed in
the PIP window. Check your
TV manual for info on PIP
feature (if available).
It’s all on the Web
For detailed setup information,
please refer to your User’s Manual.
For additional information, please
visit our website
www.lorexcctv.com/support
www.lorexcctv.com
NOTE:
Before you install the camera(s),
carefully plan where and how it will be
positioned, and where you will route
the cable that connects the camera to
the power adaptor or battery adaptor.
Before starting permanent installation,
verify its performance by observing the
image on a monitor. When camera is
positioned in same location/position
where it will be permanently installed.
NOTE:
Wireless cameras require a
power source (either an electrical outlet
or battery power) to operate. If you plan
to permanently mount the camera in
a location, it is recommended to use
the included Camera Power adaptor
to prevent interruptions in the image,
as the battery adaptor is intended as a
temporary power solution.
Did you know?
You can move your camera around
the house or from one room to
another with the use of the
included battery adaptor cable.
2
1
