Color Wireless Surveillance System
with Indoor/Outdoor Night Vision Camera(s)
1 x Wireless Receiver
1 x Power Adaptor (for receiver)
1 x RCA Video Cable
Camera Battery Adaptor Cable(s)*
Wireless Camera(s)*
Power Adaptor(s) (for camera*)
Includes:
How to use the Control Buttons:
AUTO BUTTON
– When the receiver is set to AUTO
Mode, it will continuously switch between the cameras
that are set to ON. The dwell time is set to 4 seconds per
camera (by default), however this can be adjusted to 2~30
seconds. To adjust the dwell time, press and hold both
the AUTO and MANUAL buttons at the same time – this
will produce beeps indicating one second increments (i.e.
each beep represents one second in dwell time). Once the
desired dwell time has been reached, release the buttons.
MANUAL BUTTON
– Press the MANUAL button to
switch between available cameras. The Receiver will
switch to a different camera (if available and configured)
each time the MANUAL button is pressed.
* Number of cameras may vary by model. Check your
package for specific content information.
* Connect power adaptor to local AC power outlet
* 1 of each provided with the LW1001 System/ 2 of each
provided with the LW1002 System.
** Requires viewing/recording device with RCA. Viewing/Recording device sold separately
***Additional receivers and/or cameras sold separately. See product manual for details
Connect one end of the AV Cable to the back
of the receiver. Connect the other end to the
Video IN (Yellow) and Audio IN (White) ports
on the TV or Monitor for viewing and VCR or
DVD Recorder for recording
Step 1
- Wireless Receiver Set-up Installation
Plug the Receiver power cable into the
9V POWER input. Plug the power adaptor
into a wall outlet or surge protector.
Place the receiver in a place that will have
clear reception to your camera(s). Try to
avoid placing the receiver near other 900MHz
devices (such as older cordless phones, etc.)
LW1001 Series
Quick Start Guide_EN_R1 - Page 1
1
2
3
TV
(not included)
Helpful Tips:
• Use of other 900MHz products (including older model cordless phones) may
cause interference with the picture quality. Try changing the channels on
the Receiver and Camera, or moving the interfering device to another area.
• Better reception can often be accomplished by changing the position of the
Receiver unit -or-changing the position of the Camera.
• The Receiver is a wireless product, and is subject to a number of
environmental conditions. Walking between the receiver and camera may
cause temporary interference.
• The optimal distance of the camera (during low light / nighttime use) from
the person or object is 4~6 feet (up to 2 meters). The picture may become
grainy beyond this distance due to lack of light –an additional light source
in the room, such as a night light or illuminator may improve the picture
quality.
• During low light / night use, the closer the Receiver is to the Camera, the
better the picture quality. The picture may become grainy at farther
distances. The optimal distance for normal home use is 15~60 feet (3~18
meters), however the MAXIMUM RANGE is up to 300feet in optimal
conditions.
• Audio feedback may appear when the receiver and cameras are too close
(under 15 feet / 3 meters).
*
The LW1001 series product is
expandable. To order additional
cameras please visit our website
at www.lorexcctv.com
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Skill Level
Intermediate
easy
advanced
Time
under 30 minutes
under 15 minutes
under 60 minutes
Hand Tools
Hardware
Router
Hi Speed
over 60 minutes
Time
Tools
Skills - Easy
Under 15 Minutes*
Hand Tools
Plug & Play connectors,
On screen set up
* Installation time may vary based on
application and camera cabling
NOTE:
AVOID INSTALLING IN
A LOCATION WHICH REQUIRES
THE WIRELESS SIGNAL TO PASS
THROUGH CEMENT, CONCRETE
AND METAL STRUCTURES. THIS
WILL REDUCE THE
TRANSMISSION RANGE.
