7
Video playback on the Camera is not supported. To play back the recorded videos, you can
copy them to your PC.
3.7 Exporting Images and Recorded Videos
You can export images and recorded videos locally.
Step 1 On the live interface, press
, and the
Menu
interface is displayed.
Step 2 Press
to select
System Settings
, and then press
, and the
System
Settings
interface is displayed.
Step 3 Select
USB Option
, and then press
, and the
USB Option
interface is displayed.
Step 4 Press
to select
USB Flash Drive Mode
, and then press
to confirm.
Step 5 Open the silicone plug on the top of the Camera.
Step 6 Connect the Camera to your PC with the USB cable.
Step 7 Go to the folder where the images and recorded videos are stored, and then copy the
images and recorded videos to your PC.
Step 8 Disconnect the USB cable from your PC after copy.
3.8 Upgrade
You can upgrade the Camera through SD card.
Prerequisites
● The upgrade program named“update.img” has been obtained and saved in the root
directory of the SD card.
● The SD card is installed on the Camera. See "3.2 Installing SD Card".
● Ensure that the battery capacity exceeds 50% during the upgrade. You can charge the
Camera by connecting to a computer or charger.
Procedure
Step 1 Turn off the Camera.
Step 2 Press and hold
and
buttons at the same time to start upgrade.
● Be patient and do not perform other operations during the upgrade.
● Do not disconnect the power supply during the upgrade; otherwise the device
might not be able to start.
After the upgrade, the Camera will restart automatically, and then go to the live
interface.
Step 3 (Optional) To back up the new program, turn off and then restart the Camera again.
The Camera will back up the program automatically during the restart. Wait until the
Camera goes to the live interface.
