1. ALARM IN
SEN1 – SEN 4
–
These 4 terminals are used to connect external motion sensors,
door/window contacts, etc.
2. ALARM OUT
–
This alarm output can be connected to an alarm output relay for trigger
devices with a N/O (Normally open) circuit
3. VIDEO INPUT (1-4) -
Connect to video a source, such as camera (BNC Connection). The
video outputs from the desired cameras to these inputs
4. VIDEO OUTPUT:
(L164 only) –
Connect the RCA output to display the DVR’s Menu and Video Playback
(L174V only) –
Connect the RCA output to a composite monitor or connect the VGA output
to a PC monitor. The monitor will display the DVR’s Menu and Video Playback
5. POWER INPUT –
Connect the supplied 12V power adapter to this input
6. MAIN POWER SWITCH –
ON/OFF Main power switch for DVR
7. VGA OUT (L174V only)
– Connect the VGA output to a PC monitor to display the DVR’s
Menu and Video Playback.
BACK PANEL :
-7-
1 2 3 4
5 6
7
