The 4 Pin connection is the DC Power cable, and the wider cable is the standard Hard
Drive IDE type connection.
4.
Secure the HDD in the Casing
Use screws and tighten them, positioning the HDD into place. This step is optional, but it is recommended.
7.
Lock the Cabinet.
Lock the cabinet by turning the key clockwise.
A
(locked)
B
(unlocked)
If you need to unlock the cabinet, turn the key counter-clockwise from the position shown above.
IF YOU DO NOT LOCK THE CABINET, THE DVR SYSTEM WILL NOT FUNCTION
PROPERLY.
www.lorexcctv.com
PLEASE MAKE SURE THAT YOU SET THE HARD DRIVE TO MASTER. FOR MORE
INFORMATION PLEASE CONTACT THE MANUFACTURER OR REFER TO THE
OWNER’S MANUAL
8.
Turn ON the DVR
.The system will boot up and will detect the Master hard drive
5.
Slide the top Cover over the Cartridge Casing
Slide the Cover forward over the Cartridge Case. Ensure it is secured in place over the release latch.
6.
Reinsert the Cartridge Casing into the DVR.
Fully insert the Cartridge Case into the DVR.
