35
Using the Main Menu
Alarm Input & Output Menu
•
Alarm-In Type
: Select
NO
(normally open)
or
NC
(normally closed) for the alarm in
device.
•
VLoss Response Time
: Select the time (in
seconds) for the system to record prior to
a triggered event: 0, 3, 5, 10, 30, 60, 120,
180, or Infinite.
•
Response Duration
: Select the time (in
seconds) for the system to record after a
triggered alarm or motion event: 1~255.
NOTE:
The Response Duration also applies to the
accompanying message and/or buzzer.
Alarm-In Setup Menu
To configure the Alarm-In Setup:
1. Click
Alarm-In Setup
.
2. Click on the desired alarm number (alarm
1~4) and assign it to the desired camera
number.
Alarm-Out Setup Menu
To configure the Alarm-Out Setup menu:
1. Click
Alarm-Out Setup
.
2. Click to assign an Event notification
(Motion, VLoss, Alarm, HDD ON/OFF) to an
Alarm-Out notification (Buzzer, Alarm
Full-Screen, Label, Alarm Out 1).
• Buzzer
: Select
O
to enable the system
to beep when an alarm is triggered or
motion is detected; select
X
to disable
it.
•
Alarm Full Screen
: Select
O
to enable
a full-screen display of the active
alarm/motion channel; select
X
to
disable it.
•
Label
: Select
O
to enable the system to
display camera OSD when an alarm
triggers.
•
Alarm Out 1
: Alarm 1 output.
3. To save your settings, right-click until you
return to the main screen.
Figure 13.0b Alarm Input & Output menu
Figure 13.0c Alarm-In Setup menu
Figure 13.0d Alarm-Out Setup menu
Содержание LH300 SERIES
Страница 129: ......