Loren Cook HVAD 2020, Руководство по установке и эксплуатации

Страница: 30 / 40

30
WIRING THE FAN WIRING THE FAN
• A means of disconnect must be incorporated in the fixed wiring in
accordance with electrical codes and standards.
• • DO NOT LIFT, CARRY, OR HANG FAN BY POWER CABLE. DO NOT LIFT, CARRY, OR HANG FAN BY POWER CABLE. This
could possibly cause the safety disconnect system to disconnect
power to the fan.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order
to avoid a hazard.
• For compliance with EMC standards the HVAD LF/SP Assembly
(EN561X3660) must be installed as directed in the installation manual.
The EMC requirements apply to the final installation in its entirety, not
to the individual components used. As every installation is different,
the recommended installation should follow these guidelines as a
minimum.
NOTE: The use of the LF/SP Assembly (EN561X3660) is mandatory and
will apply to HVAD Fan EN575X0010 (CE). However, for HVAD Fan
EN570X0010 (UL/CSA) the LF/SP Assembly (EN561X3660) is additional
optional equipment and is available upon request.
Electrical Installation Electrical Installation