Installation Instructions
LLR03187
9
Adjustments
Low Profile Adjustment
1.
Adjust arm to achieve desired low profile depth. (See
Figure 11)
2.
Use 1/8" hex key (L) to adjust low profile tension screws to
change tension. (See Figure 11)
IMPORTANT ! :
Only adjust small set screws on arms!
Large screws are the screws that hold arms together.
(See Figure 11)
Figure 11
Figure 12
Pitch Adjustment
1.
Adjust pitch to desired tilt position. (See Figure 13)
2.
Adjust pitch tension screw to change the adjustment
tension. (See Figure 13)
Pivot Adjustment
3.
Adjust pivot position as desired. (See Figure 13)
4.
Use 3/16” hex key (K) to adjust pivot point tension screws to
change pivot adjustment tension. (See Figure 13)
Figure 13
Rotational Adjustment
5.
The monitor may be adjusted 90 degrees in either direction
in order to provide a portrait view of the monitor. (See Figure
13)
6.
Use 3/16” hex key (K) to adjust rotational adjustment screw
to adjust rotational tension. (See Figure 13)
NOTE:
(Optional)
Rotational adjustment may be locked by
installing rotational locking screw (E) into back of
faceplate. (See Figure 14)
Figure 14
low profile arm
examples
tension
adjustment
screws
2
If space is limited in the back
If space is limited in the front
pitch
pivot point
tension
tension
5
1
3
Rotational tension
6
(E)
