Overview
11
8. Place the door back on. Ensure the
door is aligned horizontally and
vertically so that the seals are closed
on all sides before finally tightening
the top hinge.
Screw
9. Connect the terminals onto the display
board, then put top cover back.
10. Screw the 2 screws on the back.
Screw
11. With the door closed, check that
the door is aligned horizontally and
vertically and that the seals are closed
on all sidesbefore Knally tightening the
bottom hinge. Re-adjust the levelling
feet as needed.
Note: Above pictures are for reference only.
