Front panels
- 13 -
02.20
909.2710.1-06
Master Reset
–
press the buttons “arrow up”
[
1
]
and “Mode”
[
3
]
together for about five sec.
–
the display shows “Master Reset“
–
the machine is reset completely to factory settings
!!! CAUTION !!!
all
Tiptronic jobs are deleted after a Master Reset!
Before a Master reset is done, it is important to check if Tiptronic jobs are present on the ma-
chine. If necessary make a safety copy of the jobs using the PC software “JobTool”.
Menu Extras
–
press both buttons “arrow up” and “arrow down”
[
1
]
at the same time
–
use the buttons “material type” (-)
[
4
]
and “gas type” (+)
[
2
]
to switch between the menu items
forth and back
–
press both buttons “up” and “down”
[
1
]
again to go into the selected menu item
–
press the middle button “wire diameter” (End) to go back to the previeous menu level
Menu Customizing
–
press the buttons “arrow up”
[
1
]
and “wire diameter” (End) together for about five sec.
–
use the buttons “up” and “down”
[
1
]
to switch between the menu items forth and back
–
use the buttons “material type” (-)
[
4
]
and “gas type” (+)
[
2
]
to change the setting
Содержание P-Basic
Страница 19: ...Pc Boards 19 02 20 909 2710 1 06 ...
