LORCH M-Pro BasicPlus, Руководство по эксплуатации

Страница: 42 / 328

Before start-up
- 42 -
10.13
Â
Shorten the protruding plastic core so that
it is tight up against the wire feed roller,
and slide the appropriately shortened sup
-
port tube over the protruding plastic core
for stabilisation.
All:
Â
Tighten the torch and thread the wire elec
-
trode in.
The order numbers of the replace
-
ment parts depend upon the type
of torch used and the diameter of
the wire, and can be obtained from
the torch spares lists.
42
40
41 39 38
25 17
43
7
44
Abb. 16: Wire feed
7
Central socket
17
Central connection (torch)
25
Wire feed roller
38
Retaining nipple (=clamp) of the plas
-
tic liner for 4.0 mm and 4.7 mm out
-
side diameter
39
O-ring
40
Union nut
41
Plastic liner
42
Support tube for plastic cores with 4
mm OD Support tube not required with
OD of 4.7 mm.
43
Guide tube
44
Wire feed spiral
i