LSM-500-066 Rev F
Page 13 of 14
LoPresti Aviation
800-859-4757 / 772-562-4757 or fax 772-228-9750
http://www.LoPrestiAviation.com
210 Airport Drive East, Sebastian, Florida, 32958, U.S.A.
Maintenance Requirements –
Instructions for Continued Airworthiness
1. Maintenance Manual information for the Boom Beam is contained in LoPresti Speed
Merchants Installation Manual Number LSM-500-066 (this document), and should be
placed into the operators appropriate airplane Maintenance Manual.
2.
Line Replaceable Unit (LRU) part numbers and other necessary part numbers
contained in the installation data package should be placed into the aircraft operators
appropriate airplane Illustrated Parts Catalog (IPC).
3.
Wiring diagram information contained in this data package should be placed into the
aircraft operators appropriate airplane Wiring Diagram Manuals.
4.
Scheduled Maintenance Program tasks to be added to the aircraft operators
appropriate airplane maintenance program are as follows:
5. During an inspection interval of the lesser of 600 hours or one year, inspect the
mechanical and electrical integrity of the BOOM BEAM equipment and components.
All fasteners must be checked for tightness and all cable ties must be checked for
the security of the wiring harnesses. Loose or broken fasteners or cable ties must
be tightened or replaced.
The wiring harnesses must be checked for frayed or damaged insulation, broken
wires or connectors. Replace if damaged.
The bulb/starters, ballasts and reflectors must be checked for soundness in
mechanical and electrical conditions. Cracked or broken bulb/starter, ballast, or
reflector must be replaced.
Check for cracking in the reflector housing clamp flanges and for safety wire
integrity (if existing). Damaged clamp or broken safety wire must be replaced.
