Lopo GS-205B Plus, Руководство по эксплуатации

Страница: 6 / 12

6
3.Adjusting the Temperature
4.Adjusting the Time
5.Adjusting the Pressure
5.2 A
REMEMBER: To allow for the thickness of your garment when adjusting the pressure.
3.1
Press the “set” button once time.
“Temperature” lights will illuminate, press
the “up” and “down” button to set target
start temperature (see figure 3.1)
3.2
Press the “set” button second time.
“Setting” lights will illuminate, press the
“up” and “down” button to set printing
temperature (see figure 3.1)
4.1 Once you have adjusted the temperature,
press the “set” button again. “Time” lights
located in the display will illuminate. (see
figure 4.1)
4.2
Next, press the “up” and “down” button to
set target printing time.The time setting range
can be set from 0~999.
5.1 The Pressure Adjustment Knob is
located as picture.(See figure 5.1)
5.2 Adjust the pressure by turning the
knob clockwise to increase pressure
and counter clockwise to decrease
pressure.
3.1
4.1
5.1