lopital Reflex, Инструкция по эксплуатации, Страница: 38 / 100

38 | Instructions for use | Reflex Shower-toilet chair
3.4. Head / neck support
• The Reflex has a head / neck support that can be adjusted
in terms of both height and depth.
• In order to set its height, the rotating button (1) on the back
of the chair must be undone. Once you have reached the
required height, do the button up again
(See figure 17)
.
• To set the depth of the head / neck support, the handle (2)
is unlocked. Once you have reached the required height, do
the handle up again. The depth setting has a range of 7 cm.
• The Reflex has a curved head / neck support, allowing the head of the client to be
supported effectively.
Always replace this component on the chair when you have finished using it.
This will avoid the component being lost.
3.5. Moving upwards / downwards
Moving upwards
• If the client is seated in the chair, first apply the brakes to the wheels
and then move the chair upwards.
• Move the chair upwards by pressing the button that shows an ‘up’
arrow. The seat will then move upwards simultaneously (See figure 18) .
• You can stop the movement whenever you like by taking your finger
off the button.
• During the upward movement, maintain contact with the client.
Moving downwards
• Move the chair downwards by pressing the button that shows a ‘down’
arrow. The seat of the Reflex will move downwards simultaneously
(See figure 19) .
• You can stop the movement whenever you like by taking your finger
off the button.
• During the downward movement, maintain contact with the client.
Before moving the chair downwards, check to ensure there are no persons or
objects in the vicinity of the chair.
Figure 19 Moving
downwards.
Figure 18 Moving
upwards.
Figure 17 Head support.
2
1