Maintenance
39
© Travis Industries
4141007
100-01402
Monthly Maintenance (or Every 20 Bags of Pellets) – Empty the Ashpan
MAKE SURE THE HEATER HAS FULLY COOLED (APPROXIMATELY 45 MINUTES) BEFORE
CONDUCTING SERVICE.
THE ASHPAN MUST BE IN PLACE WHILE THE HEATER IS IN USE.
The ashpan will accumulate ash as you use the appliance. See the steps below to empty the ashpan.
1. Rotate the ashpan handle counter-clockwise and swing it out to access the ashpan.
2. Slide the ashpan forward. Use the built-in handle and lifting rod to lift the ashpan out of the firebox.
3. Remove the ashpan from the appliance and properly dispose of the ashes (see “Disposal of Ashes”
on page 32 for details). You may wish to clean the area below the firebox.
