Troubleshooting
How to Connect from Different Devices
This is the second page of the Setup Guide. Start on the opposite side first.
Regulatory Information
I have problems connecting to the LP-BA19.
a. Go to the Bluetooth settings on your device and check that Bluetooth has been enabled on the device. Turn Bluetooth off and back on. Press the
connect button the LP-BA19 to make it discoverable. Locate the “LP-BA19” adapter from your device’s Bluetooth device list. Tap/click it to connect.
b. If the device does not connect, remove or “forget” the LP-BA19 from your Bluetooth device. After you have removed the device, press the Connect
button on the LP-BA19 to pair the adapter to your Bluetooth device once again. Once it appears on your device list, tap/click it to connect to it.
The LP-BA19 is connected but I do not hear any music/sound from my speakers
a. Check that your cables are connected to the speaker.
b. Check that your speaker is on or powered.
C. If your speakers have their own volume control, check that the volume is turned up.
I have multiple LP-BA19 Adapters, how do I connect?
a. Each LP-BA19 will have a unique ID number at the end of its name. This ID displays in the Bluetooth device list on your Bluetooth device. For
example : LP-BA19 C12. You can use this ID to identify which LP-BA19 to connect to.
Q
A
Q
A
Q
A
w w w . l o o p c o m m . c o m
Go to Settings > Change PC Settings >Devices > Add a Device > select "LP-BA19"
Windows PC/Tablet
Go to Bluetooth icon > select " LP-BA19" >select Use as Audio Device
Mac
Go to Menu > Settings > Wireless and network >Bluetooth Settings > select " LP-BA19"
Android Devices
Go to Settings > Bluetooth > select "LP-BA19"
iOS Devices
LP-BA19
LP-BA19
LP-BA19
LP-BA19
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment offand on,
the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modi
fi
cations not expressly approved by the party responsible for compliance
could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or periph-
eral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed
and operated with a minimum distance of 20 centimeters between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
