Copyright © 2014 Loopcomm Technology Inc. All rights reserved.
Advanced Settings
These settings apply to the Local Network and your Internet Connection
Network. If you are not familiar with these settings, please refer to a
network administrator to avoid putting your network at risk.
Enable uPnP:
Universal Plug and Play is a network feature that allows
uPnP enabled devices to “just work” with each other when connected to
the same network. UPnP can work across different network media, such
as an Ethernet connection or wireless connection. With UPnP enabled,
network devices may change security settings within the Dual Band
Wireless Router’s firewall to allow access over the Internet. By default,
UPnP is disabled to avoid exposing your network to security issues.
Enable IGMP Proxy:
I
nternet Group Management Protocol is a
communication protocol used by hosts and routers on the network to
establish multicast group memberships. IGMP Proxy is typically used to implement multicast routing and commonly
used when advanced protocols such as PIM is not suitable.
Enable Ping Access on WAN:
Allows users to ping the WAN interface IP address from the internet.
Enable Web Server Access on WAN (Remote Management):
Allows access to the Web Menu over the Internet
Enable IPsec pass through on VPN connection:
Allows the IP security protocol suite to pass through on a VPN
connection.
Enable IPv6 pass through on VPN connection:
Allows the IPv6 protocol suite to pass through on a VPN connection.
