10
Note:
For
sn
(special function), please contact your nearest Loop sales representative.
Where
pt
is used to select the following functions.
pt
=
Description
Note
PWR
complied with -48 Vdc (SD48) power modules
PWRIE1613
complied with IEEE1613 standard, and with -48 Vdc (SD48) power modules
For 8E&M Card:
Where
x
is used to select all of voice card signaling bits:
x =
Description
Note
E
Follows ETSI signaling bits
A
Follows ANSI signaling bits
R
Reverse for ON-HOOK and OFF-HOOK signaling bits exchange
AR
Follows ANSI signaling bits and reverse bit
S
Follows customer’s special bit or function assignment
S4
Disable the function of the test button
S5
Forcing all ports to be OFF-HOOK when an alarm occurs
8EM
S6
Forcing all ports to be ON-HOOK when an alarm occurs
Jumper
selectable for all
channels
Note:
For S (customer‘s special bit), please refer to SFP brochure or contact your nearest Loop sales representative.
For Magneto Card
Where
x
is used to select version type:
x= Description
Note
16
16 Hz ring generator
20
20 Hz ring generator
25
25 Hz ring generator
50
50 Hz ring generator
20 Hz is the general setting for all
MAG cards. For special settings
(16,25,50), please specify your need
by filling in the x option.
For Example:
Loop-O9500-R-CHA-G, Loop-O9500-R-CBA-G, Loop-O9500-R-FANA-G, Loop-O9500-R-CC4-G,
Loop-O9500-R-63TE-G, Loop-O9500-4E1-RJ, Loop-O9500-R-4GH, Loop-O9500-R-SD48:
For model O9500 6U height Rack chassis with one CPU card, one connect board, and one Fan board, one 63E1 software
programmable interface plug-in card, one 4-channel E1 interface with RJ48C connectors, one 4-channel G.SHDSL
plug-in card (1-pair), and a single –48 Vdc power module.
