Bracket Installation
Mounting hole diameter 10mm
1. Assemble it on the base of the reflective mirror. Remove the base from the reflective mirror.
Insert the ball head bolts with crooked into the mounting hole and remount the mirror. I
t’s
advisable to adjust the angles of the reflective mirror by increasing gaskets if the angle is not
right after the screw is tightened. As is shown in the picture:
2. Assemble other pieces if necessary, other pieces can be fixed on any position with screws
whose mounting holes go with the ball head bolts.
Power Connection
1. Connect the red wire to the ACC positive and the black to the GND.
2. Connect the USB receptacle line with the waterproof connector of the main line.
Item
Parameters
Input
9-28V
Output
5V 3A ,9V 2A
Cable length
2.5m
Note: Please carefully choose a suitable location for installation to ensure safety.
