Look Solutions TINY S, Руководство по эксплуатации

Страница: 11 / 20

11
6. The Battery
The supplied battery is a maintenance-free 3.7V Lithium-Ion battery. It can be used
in any position.
The connection to the Tiny S is established by putting the battery into the slot at the
back of the machine.
6.1 General
6.2 Capacity and Lifetime
The battery has a capacity of 1500 mAh and is supplied in a 50% charged status.
Charge the battery before using it the first time with the supplied charger. Please
note the operating instructions of the charger (see point 6.4).
A fully-charged battery can generate more than 100 fog emissions of 4-5 seconds.
The permanent fogging time amounts to approx. 10 minutes.
The battery will lose its capacity with use and will wear out after approximately two
or three years.
6.3 Operating and Storing
Lithium-Ion batteries are modern energy suppliers with huge capacity, small di-
mensions and light weight. Due to its high energy seal and the materials used these
batteries may be harmful. Therefore please read the safety instructions carefully (see
point 6.6)!
Optimal storage of the fully charged battery at 15° C and an air humidity of 45 -
85%.
If the battery will not be used for a long time it must be recharged regularly (ap-
prox. every six months).
6.4 Charging the Battery
For charging the battery please use the supplied automatic charger. A discharged
battery can be charged within 2 hours.
– Connect the USB-plug of the cable to the wall wart or your computer. If you use the
wall wart, connect it to a power socket (100-240 V~/50Hz-60Hz).
– Connect the micro-USB-plug to the charger.
– Place the battery on the charger.
The Charge-LED lights red as long as the battery is charging. When the battery is
fully charged, the Charge-LED will change its colour to green.
– Disconnect the charger from the battery.