2
lit, it indicates the wired network is applied. If it is not lit, it
indicates that the server does not connect
to
the wired
network.
WLAN Indicator
blinks to indicate wireless network activity. If
it
is lit, it indicates the wireless network is applied. If it is not
lit, it indicates that the server does not connect to the wireless
network.
USB Indicator
is lit while a USB device connects to a USB Port
of the USB device server. If it is not lit, or if it blinks, there is a
problem with the USB device or the USB device server.
⑤
⑤
⑤
⑤
.
Connect USB Device Server to Your Wired Network
I.
Connect USB device server to the wired network, such as a LAN switch
or a LAN hub, using a LAN cable.
II.
Connect USB printers, hard drives or flash ROM disks, or all-in-one
series printers (AIO/MFP), or USB speaker, or USB 1.1 camera to the
server using USB cables.
III.
Plug in the power adaptor (included in this package) to power on the
USB device server.
⑥
⑥
⑥
⑥
.
Connect to Your Wireless Network
Just skip this step if you are using wireless network.
I.
Follow Step 5.
II.
Properly set up wireless configuration as Step 8.
III.
Plug-off the LAN (Ethernet) cable.
IV.
Plug-off the power adapter and then plug-in the power adapter to
restart server. LCS-US204 will connect to your wireless network.
⑦
⑦
⑦
⑦
.
Install Utility
I.
Insert the included CD-ROM into the personal computer. The
Autorun screen should appear.
II.
Click
Install Product
button.
III.
Click
Next
, if you see any Next button in installation windows.
IV.
Click
Finish
.
⑧
⑧
⑧
⑧
.
Configure USB Device Server with Utility
Using the Control Center Software (Fig1)
:
1.
Run the Control Center. It will automatically search the existing servers