33
6.1.2.5 Terminology
The following table shows general parameter types used in command syntaxes and descriptions.
<port>
The port number
<portlist>
Comma and/or dash separated port list. This type can be used for
specifying individual ports or a range of ports. The keyword ‘none’ can be
used to specify an empty port list. The keyword ‘all’ can be used to
specify all ports. Example: 1,3,8-12
<macaddress> MAC Address; format: “hh-hh-hh-hh-hh-hh”, “hh:hh:hh:hh:hh:hh” or
“hhhhhhhhhhhh”. The hh is Hexadecimal number in the range 0x00 to
0xFF. Example: 00-00-24-F1-02-03
<vid>
VLAN ID: Decimal number in the range 1-4095. The keyword ‘all’ can be
used to specify all VLAN IDs.
<vidlist>
Comma and/or dash separated VLAN ID list. This type can be used for
specifying individual VLAN IDs or a range of VLAN IDs. The keyword
‘none’ can be used to specify an empty VLAN ID list. Example: 1,2,4-6
<UDP/TCP port> UDP/TCP port number: Decimal number in the range 0-65535.
<rate>
Leaky bucket rate in Kbit/s [0-1000000k] or Mbit/s [0-1000m]
The <portlist> type is helpful when setting up multiple ports in the same mode. For example, the
following commands divide the ports into two untagged VLANs and enable VLAN awareness:
vlan add 1 1-8
vlan add 2 9-16
vlan pvid 1-8 1
vlan pvid 9-16 2
vlan aware all enable
