Longshine LCS-883R-SW2402, Руководство пользователя

Страница: 4 / 14

AC Power
The switch’s power supply automatically adjusts to line power in the range 100~240 VAC and
50~60 Hz.
Cable Selection
The switch can use the following types of cabling:
x
10BASE-T: Category 3, 4 or 5 UTP/STP
x
100BASE-TX: Category 5 UTP/STP
x
1000BASE-T: Category 5 UTP/STP
Category 5 or enhanced cable is preferred to use with this product in structured wiring
environments. This will ensure correct operation of all ports at 10Mbps, 100Mbps or
1000Mbps.
Station Connection
Connect each station to the switch by a category 5 twisted-pair cable (straight or cross-over cable).
Plug one RJ-45 connector into a front-panel port of the switch, and plug the other RJ-45 connector
into the station’s network adapter.
Switch Connection
As all ports support auto MDI/MDI-X function, the connection is independent of cable type and
allows using a straight cable to make a switch-to-switch connection.
The switch supports 7 groups port-trunk. As each port-trunk group provides 800Mbps bandwidth
(the 7
th
group provides 4Gbps bandwidth) on Full Duplex mode, it is ideal for establishing
switch-to-switch connections.
3
Installation